Feeder and Subfeeder Design

A step by step guide for feeder and subfeeder design.

“Feeders” are conductors which carry electric power from the service equipment (or generator switchboard) to the overcurrent devices for groups of branch circuits or load centers supplying various loads.

“Subfeeders” originate at a distribution center other than the service equipment or generator switchboard and supply one or more other distribution panelboards, branch circuit panelboards, or branch circuits. Code rules on feeders also apply to subfeeders.

Feeders and subfeeders must be capable in carrying the amount of current required by the load, plus any current that may be required in the future.

Selection of the size of a feeder depends upon the size and nature of the known load as computed from the branch circuits, the unknown but anticipated future loads and the voltage drop.

Because feeders & subfeeders are inherently carrying heavy or high ampere loads, most electrical fires originate in these circuits. Electrical fires usually don’t happen after one or two weeks from the time of energization. They usually happen after several years of operation where loads are added indiscriminately and capacities of feeder cables went overloaded, unnoticed.

II. What are to be Designed?

*

RELEVANT CODE PROVISIONS:

1.) The feeder conductor ampacity shall be at least equal to 125% of a continuous load. (NEC Section 220-10b).

2.)The total load on any overcurrent device located in a panelboard must not exceed 80% of the rating of the overcurrent device. (NEC Section 384-16c).

3.)Circuit conductors shall be protected against over-current in accordance to their ampacities, but where the ampacity of the conductor does not correspond with the standard ampere rating of a fuse or a circuit breaker, the next higher rating shall be permitted only if this rating does not exceed 800 amperes. (NEC Section 240-3).

4.)Circuit conductors shall be protected against over-current in accordance to their ampacities, but where the ampacity of the conductor does not correspond with the standard ampere rating of a fuse or a circuit breaker, the next higher rating shall be permitted only if this rating does not exceed 800 amperes. (NEC Section 240-3).

5.)These normal ampacities may have to be reduced or derated where there are more than three conductors in a cable or raceway (Note 8 to Tables 310-16 through 310-19). This means a change in ampacities of circuit conductors.

6.)The current permitted to be carried by the branch circuit conductors or feeder may have to be reduced if the load is continuous. This does not mean a change in the ampacities of the conductors but the rule refers to a limit of the load to be carried by the conductors. The change of ampacity of conductors because more than 3 conductors are installed in a cable or raceway is distinctly different from limiting the load. (NEC Section 210-22c).

ILLUSTRATION 1

Problem Determine the minimun size of the conductor that could be used to supply a ligting load of 30,000VA fed by a 240 V, 3-Phase, 3 wire feeder operating at 80% power factor?

**

1.) Feeder Amps = (30,000)/(220x1.732) = 78.73 A
2.)Feeder Size = 1.25x78.73 = 98.41 (use three # 3 THW)
Ampacity 100 A
Max Load Allowed = 100 x 0.80 = 80A
3.)Feeder Protection = Feeder Ampacity = 100A
Use 100A CB or Fuse, rated 240 V, 3 poles
4.)The Busbar in the panelboard shall have a minimum ampacity of 100A
5.)The mains of the Panelboard shal be rated 100A,3-poles,240V
6.)The equipment grounding (4th wire), use #6 TW. ( Reminder: the system in this example is a 3-phase 3 wire. The 4th wire is not a current carrying conductor but is intended for equipment grounding)

ILLUSTRATION 2

***

Three Line Diagram

Line Current = 96 x 1.732 = 166 A (line current for delta
connected Load)
(note: largest phase current 96 A was used)
Size of Main Feeder Conductor = 1.25 x 166 = 207 A
use 3/0 THW, Ampacity: 200A: Main Breaker Size:200AT, 250AF

But with some reserve capacity in mind:
use 4/0 THW Ampacity:230A (assuming only 3 current carrying conductors in a conduit & not more than 30 deg C Ambient temp)
Main Breaker Size: Use, 225 AT, 250AF

FEEDER CALCULATION WITH UNKNOWN LOADS

NEC Table 220-3(b) lists certain occupancies (types of buildings) for which load densities (lighting & general-purpose receptacles) specified in volt-amperes per square foot.

The PEC also lists down the lighting load densities in terms of volt-amperes per square meter.

In each type of occupancy, there must be adequate feeder circuit capacity to handle the total load that is represented by the product of volt-amperes per unit area times the area of the building. This becomes the most likely connected load in that particular occupancy.

The connected load shall then be multiplied with a demand factor in order to approximate the maximum demand of the load served by a feeder or sub-feeder. The maximum demand plus a load growth factor of 35% (next 5 years), or 50% (for the next 10 years) may be inputted to determine the feeder. It is recommended that a load growth factor be imbedded in the design.

In design practice, a 55%-70% loaded feeder or transformer in a brand new office building is usually acceptable.

****
*****

ILLUSTRATION 1

SIZING PARALLEL FEEDERS

Parallel Feeders are feeders with more than one conductor per phase. The ampacity of the parallel conductors is equal to the ampacity of one multiplied by the number of conductors in parallel. Parallel conductors shall be of the same size, length & type.

Parallel feeders must not be misunderstood as “equivalent conductors”. Equivalent Conductors are used in grounding circuits having a different definition.

“Conductors in sizes 1/0 AWG (50 mm2) and larger maybe run in multiples provided the arrangement is such as to assure equal division of total current among all conductors involved.

All of the multiple conductors shall be of the same length, of same conductor material, circular mil area, same insulation type and terminated in the same manner. Where run in separate raceways or cables, the raceways or cables shall have the same characteristics”.

Example:

Ampacity of 2// 500 MCM THW /phase in two separate conduits is 380 A x 2 or 760 Amps

Ampacity of 3// 4/0 THW per phase in three separate conduits is 230 A x 3 or 690 Amps

But if installed in common conduit or raceway, Note 8 must be considered:

Ampacity of 2// 500 MCM THW/phase in one 5 inch conduit is 380 x 2 x 80% or 608 A

Ampacity of 3// 4/0 THW in one 3-1/2 inch conduit is 230 x 3 x 70% or 483 Amps

THE CONDUIT WIRING METHOD

What do “New Work” & “Rewiring of Existing Conduits” mean in conduit wiring method?

Why the code mandated less number of conductors inside conduits in “New Work” than in “Rewiring” works?

In summary, the intent of the NEC is for only 25% conduit fill for “new work” installations – to give allowance for future rewiring without the need for new conduit installations.

The same installations can be filled up to a maximum of 40% fill if there is a need to rewire them.

In no way however, that the conduit be filled up more than 40%.

******

Free download Electrical dictionary, handbook, power system etc.

Electrical engineering dictionary
http://www.filestube.com/6a51a66a2bf71fb803e9/go.html

Standard handbook for electrical engineer
http://www.filestube.com/1da4e4ac5a64a1a303e9/go.html

Electrical and electronics principles and technology
http://www.filestube.com/eda686f24ecedfeb03e9/go.html

Principles and applications of electrical engineering
http://www.filestube.com/c01047f178b96d8103ea/go.html

Electrical power system quality 2nd editions
http://www.filestube.com/aaf7cdf9c3ec55d003e9/go.html

Electrical circuit theory and technology
http://www.filestube.com/026d6d488b5854d203e9/go.html

Fast analytical techniques electrical electronics circuits
http://www.filestube.com/d804b3d3894e7ff103e9/go.html

Handbook of electrical design details second edition
http://www.filestube.com/4b1e2d8c62dee1a003ea/go.html

ELectrical instulation for rotating machine
http://www.filestube.com/ac1ed3cca285f73003e9/go.html

Electrical and electronics principles and technology
http://www.filestube.com/22b676c00e3a3e3b03e9/go.html

Electrical contacts fundamentals applications and technology
http://www.filestube.com/36dc2f96ca9ecddc03e9/go.html

Setting fires with electrical timers
http://www.filestube.com/90b208ac89e548ec03e9/go.html

Electrical engineers portable handbook
http://www.filestube.com/f8e0bc88b393259003e9/go.html

Nice eBooks Electrical Engineering eBooks Mathematics for Electrical, Scanning, Polyphase Electric Motor, Electrical Handbook,

Electrical Engineering - Neural Network Design
http://rapidshare.com/files/20180896/Neural_Network_Design_M.Hagan_.pdf.html



Scanning Probe Microscopy
Electrical and Electromechanical Phenomena,a constantly growing knowledge base of electrical and electromechanical characterization at the nanoscale.
http://rapidshare.com/files/25037399/Kal_ScaProMicV1forgiga.part1.rar
http://rapidshare.com/files/25038109/Kal_ScaProMicV1forgiga.part2.rar
password = giga



Mathematics For Electrical Engineering And Computing
Embraces many applications of modern mathematics, such as Boolean Algebra and Sets and Functions, and also teaches both discrete and continuous systems.
http://rapidshare.com/files/21346592/MathematicsForElectrical_Engineering_AndComputing_MUYA.rar
http://depositfiles.com/files/706967
http://minishare.larcom.sk/download.php?sid=735&name=MathematicsForElectrical_Engineering_AndComputing_MUYA.rar
http://depositfiles.com/files/708727
http://www.filefactory.com/file/a8aa9a



Noise of Polyphase Electric Motors
Provides the most up-to-date and comprehensive treatment of issues related to noise and vibration in electric motors, Gathers the fundamental concepts along with all of the analytical, numerical, and statistical methods into a unified reference. It supplies all of the tools necessary to improve the noise performance of electrical motors at the design stage.
http://rapidshare.com/files/3132063/NPEM.rar
http://www.9iv.com/down/controls/downlist.aspx?id=868




Principles of Electrical Measurement
builds a solid foundation in the necessary background concepts and fundamentals needed to develop and use modern electrical instruments.Fundamentals of electrical measurements,Digital processing of the measurement signals
http://rapidshare.com/files/12765836/293-297.rar
http://rapidshare.com/files/12361498/PROFEM.rar
password = tFPROFEM.rar



Standard Handbook for Electrical Engineers
Units, Symbols, Definitions, and Conversion Factors , Electric and Magnetic Circuits , Measurements and Instruments , Generation , Prime Movers , Alternating-Current Generators, Direct-Current Generators , Hydroelectric Power Generation , Power System Components, Electric Power System Economics , Transmission Systems , Power-System Operation , Power Distribution ,
http://mihd.net/z1w6hs




A Mathematical Introduction to Control Theory
Series in Electrical and Computer Engineering, An introduction to modern control
http://rapidshare.com/files/13590114/A_Mathematical_Introduction_to_Control_Theory.rar-1860945708.rar



Design of Electrical Services for Buildings
Electrical services are a vital component in any building, so it is necessary for construction professionals to understand the basic principle of services design.
http://mihd.net/tobrhi




The Electrical Engineering Handbook
Electrical topics of great concern to almost all modern engineers. The authors have assembled an authoritative and comprehensive reference tool specifically targeting practicing engineers.
http://depositfiles.com/files/574053




Oxford English for Electrical and Mechanical Engineering
Coverage in all four skills with up-to-date technical content.
http://rapidshare.com/files/9758900/oxford_english_for_electrical_and_mechanical_engineering_von_eric_h._glendinning_ebook.djvu

Rapid ebooks RF Engineering pocket book, Industrial control wiring guide, image processing, noise in receiving system, High voltage engineering, commu

Rapid ebooks RF Engineering pocket book, Industrial control wiring guide, image processing, noise in receiving system, High voltage engineering, commu

Newnes Radio and RF Engineering Pocket Book
Contents : Propagation of radio waves, The decibel scale, Transmission lines, Antennas, Resonant circuits, Oscillators, Piezo-electric devices, Bandwidth requirements and modulation, Frequency planning, Radio equipment, Microwave communication, Speech digitization and synthesis, VHF and UHF mobile communication, Mobile radio systems, Batteries, Satellite communications, Connectors and interfaces, Abbreviations and symbols.
http://rapidshare.com/files/105697888/Newnes.Radio.and.RF.Engineering.Pocket.Book.rar.html

Newnes Industrial Control Wiring Guide
Contents: Safety, Drawings, Wire types and preparation, Soldering and termination, Cable forming, Connections and routing, Hardware, Components, Switches and lamps, Earthing and screening, PLC wiring,
http://rapidshare.com/files/105697889/Newnes_20Industrial_20Control_20Wiring_20Guide.rar.html



Nixon Aguado : Feature Extraction and Image processing
Contents: Images, sampling and frequency domain processing, Basic image processing operations, Low- level feature extraction ( including edge detection), Feature extraction by shape matching, Flexible shape extraction ( snakes and other techniques), Introduction to texture description, segmentation and classification,
http://rapidshare.com/files/105697917/Nixon_.Aguado..Feature.Extraction.and.Image.Processing.2002.rar




Noise in Receiving Systems
Contents: Overview of common noise sources, Thermal noise, Random variables and processes, Noise Temperature, Single port networks, single port network.
http://rapidshare.com/files/105697934/Noise.In.Receiving.Systems.rar.html



Nonlinear Microwave and RF Circuits
Contents: Introduction, Fundamental Concepts, and Definitions, Solid-State Device Modeling for Quasistatic Analysis, Harmonic-Balance Analysis and Related Methods, Volterra-Series and Power-Series Analysis, Balanced and Multiple-Device Circuits, Diode Mixers, Diode Frequency Multipliers, Small-Signal Amplifiers, Power Amplifiers, Design of Solid-State Power Amplifiers, Active Frequency Multipliers, Active Mixers and FET Resistive Mixers, Transistor Oscillators.
http://rapidshare.com/files/105697979/Nonlinear.Microwave.And.RF.Circuits.2nd.Edition.rar.html



HIGH VOLTAGE ENGINEERING
The demand for the generation and transmission of large amounts of electric power today, necessitates its transmission at extra-high voltages. In the developed countries like USA, power transmission voltages have reached 765 kV or 1100 kV,and 1500 kV systems are also being built. In our country, 400 kV a.c. power systems have already come into operation, and in another 10 years time everystate is expected to be linked by a National Power Grid operating at 400 kV or at 800 kV. At this juncture, a practising electrical engineer or a student of electricalengineering is expected to possess a knowledge of high voltage techniques andshould have sufficient background in high voltage engineering. Unfortunately,at present only very few textbooks in high voltage engineering are available,compared to those in other areas of electrical engineering; even among these, nosingle book has covered broadly the entire range of topics in high voltage engineeringand presented the material in a lucid manner.
http://rapidshare.com/files/106553499/ecd.rar



MIXED-SIGNAL AND DSP DESIGN TECHNIQUES
Contents: SAMPLED DATA SYSTEMS, ADCs FOR DSP APPLICATIONS, FAST FOURIER TRANSFORMS, DIGITAL FILTERS, HARDWARE DESIGN TECHNIQUES,
http://rapidshare.com/files/105697370/Mixed.Signal.And.DSP.Design.Techniques.rar.html



Mobile Communications Engineering
Describes any radio communication link between two terminals of which one or both are in motion or halted at unspecified locations and of which one may actually be a fixed terminal such as a base station.Mobile-radio systems are classified as radiophones, dispatching systems, radio paging systems, packet radios, or radiotelephones (also known as mobile phones), including train phones.
http://rapidshare.com/files/105697417/Mobile.Communications.Engineering._20-_20.Theory.and.Applications_.Second.Edition.rar.html


MOBILE TELECOMMUNICATIONS PROTOCOLS FOR DATA NETWORKS
Contents: Mobile Agent Platforms and Systems, Mobile Agent-based Service Implementation, Middleware, and Configuration, Wireless Local Area Networks, Wireless Protocols, Protocols for Wireless Applications, Network Architecture Supporting Wireless Applications, Architecture of Wireless LANs, Routing Protocols in Mobile and Wireless Networks, Handoff in Mobile and Wireless Networks, Signaling Traffic in Wireless ATM Networks, Two-phase Combined QoS-based Handoff Scheme.
http://rapidshare.com/files/105697490/Mobile.Telecommunications.Protocols.For.Data.Networks.Wiley._20-_20.eBOOK.rar.html


MODERN RECEIVER FRONT-ENDS
Systems, Circuits, and Integration, RECEIVER SYSTEM DESIGN, REVIEW OF RECEIVER ARCHITECTURES, SILICON-BASED RECEIVER DESIGN, SUBHARMONIC RECEIVER DESIGNS, ACTIVE SUBHARMONIC RECEIVER DESIGNS, DESIGN AND INTEGRATION OF PASSIVE COMPONENTS, DESIGN FOR INTEGRATION, Digital Circuitry Noise.
http://rapidshare.com/files/105697537/Modern.Receiver.Front.Ends.Systems.Circuits.and.Integration.Wiley.Feb.2004.eBook-DDU.rar.html


Modern Signal Processing
The book covers two main areas: computational harmonic analysis, envisioned as a technology for efficiently analyzing real data using inherent symmetries; and the challenges inherent in the acquisition, processing and analysis of images and sensing data in general—ranging from sonar on a submarine to a neuroscientist’s fMRI study.
http://rapidshare.com/files/105697548/Modern.Signal.Processing.rar.htmlhttp://rapidshare.com/files/105697537/Modern.Receiver.Front.Ends.Systems.Circuits.and.Integration.Wiley.Feb.2004.eBook-DDU.rar.html

Rapid Fiber Optic sensors, Fiber to the Home, Broadband wireless system, Electrical Dictionary, Electric Circuits, Distortion in RF Power, HDTV for Du

Rapid Fiber Optic sensors, Fiber to the Home, Broadband wireless system, Electrical Dictionary, Electric Circuits, Distortion in RF Power, HDTV for Du

Fiber Optic Sensors
Inside the Books: Overview of Fiber Optic Sensors, Fiber Optic Sensors Based upon the Fabry–Perot Interferometer, Polarimetric Optical Fiber Sensors, In-Fiber Grating Optic Sensors,Distributed Fiber Optic Sensors,Fiber Specklegram Sensors,Interrogation Techniques for Fiber Grating Sensors and the Theory of Fiber Gratings, Fiber Gyroscope Sensors,Optical Fiber Hydrophone Systems,Applications o Fiber Optic Sensors.
http://rapidshare.com/files/105694769/Fiber.Optic.Sensors.rar.html



Fiber to the Home The New Empowerment Wiley Interscience
Books Contents: A Few Definitions, Cable Competition,Triple Play, The Digital Divide, Needs of the Telecomm Service Providers, Future-Proof Nature of the Fiber Last Mile, The Wireless “Alternative", What Does a PON Look Like?, IEEE Ethernet Passive Optical Network (EPON) Standard 802.3ah, Comparison of ATM-Based and Ethernet-Based PONS, Self- and Cross-Phase Modulation, Four-Wave Mixing, Optical Amplifiers, Lasers and Transmitters,The Physics of Lasing and Photodetection,Subscriber Premises Optical Network.
http://rapidshare.com/files/105694822/Fiber.to.the.Home.The.New.Empowerment.Wiley.Interscience.Oct.2005.eBook._20-_20.LinG.rar.html



Fixed BroadBand Wireless System Design
Contents: Fixed Broadband Wireless Systems, Evolution of Wireless Systems, Electromagnetic Wave Propagation, Linear, Circular, Elliptical, and Orthogonal Polarizations, Material Transmission, Propagation and Channel Models, Theoretical Channel Models, Fading Models, Microwave Multipath Fading Mechanisms, Free Space Optics Fog Fading Models, Fixed Wireless Antenna Systems, Antenna System Fundamentals, Electrical Beamtilt, Mechanical Beamtilt, and Null Fill,Modulation, Equalizers, and Coding, Digital Modulation – Amplitude, Frequency, and Phase, Multiple-Access Techniques, Traffic and Application Mix Models.
http://rapidshare.com/files/105695031/Fixed.Broadband.Wireless.System.Design._20-_20.Wiley.-.2003.-.By.Laxxuss.rar.html



For Dummies HDTV
Books inside: HDTV Fundamentals, What the Heck Is HDTV?,What’s Important in an HDTV, Cables and Connections, Hooking Up Your HDTV, Who’s Showing HDTV?., The Cable Guy, High-Definition Cable, Planning a Satellite TV System, Checking Out Your Digital Options, Gadgets, Home Networking, Understanding Audio,
http://rapidshare.com/files/105695067/For.Dummies.HDTV.For.Dummies.Nov.2004.eBook._20-_20.DDU.rar.html



Fundamental Limitations in Filtering and Control
Contents: A Chronicle of System Design Limitations, Limitations in Linear Control, Feedback Control Systems, Discrete Systems, Extensions to Periodic Systems, Extensions to Sampled-Data Systems,Extensions to Sampled-Data Systems,Limitations in Linear Filtering, Extensions to SISO Prediction, Limitations in Nonlinear Control and Filtering, Review of Complex Variable Theory, Main Integral Theorems, Green's Theorem,The Cauchy Integral Theorem,Extensions of Cauchy's Integral Theorem.
http://rapidshare.com/files/105695091/Fundamental_20Limitations_20In_20Filtering_20And_20Control.rar.html


Distortion in RF Power
Some Circuit Theory and Terminology, Classification of Electrical Systems, Calculating Spectrums in Nonlinear Systems, Volterra Series Analysis, Memory Effects in RF Power Amplifiers, Electrical Memory Effects, Electrothermal Memory Effects,Characterization of Volterra Models, AC Characterization Flow, Calculation of Small-Signal Parameters,Simulating and Measuring Memory Effects.
http://rapidshare.com/files/105693387/Distortion.in.rf.power.amplifiers.ebook._20-_20.lib.rar.html




Electric Circuits - DC
Book Contents: BASIC CONCEPTS OF ELECTRICITY, Static electricity, Voltage and current,OHM's LAW, How voltage, current, and resistance relate, Calculating electric power, ELECTRICAL SAFETY, Shock current path, Electric shock data, SCIENTIFIC NOTATION AND METRIC PREFIXES, Arithmetic with scienti¯c notation, Metric pre¯x conversions, SERIES AND PARALLEL CIRCUITS,What are "series" and "parallel" circuits?, DIVIDER CIRCUITS AND KIRCHHOFF'S LAWS, SERIES-PARALLEL COMBINATION CIRCUITS, DC METERING CIRCUITS, What is a meter?, ELECTRICAL INSTRUMENTATION SIGNALS, Analog and digital signals, DC NETWORK ANALYSIS, What is network analysis?, BATTERIES AND POWER SYSTEMS, PHYSICS OF CONDUCTORS AND INSULATORS, CAPACITORS, MAGNETISM AND ELECTROMAGNETISM, Magnetic ¯elds and inductance, RC AND L/R TIME CONSTANTS,
http://rapidshare.com/files/105693602/Electrical.Circuits.rar.html


Electrical Engineering Dictionary
Collection of almost 200 distinguished engineers, scientists, and educators scattered around the globe
http://rapidshare.com/files/105693650/Electrical.Engineering.Dictionary.PA.Laplante_CRC.rar.html


Fiber-Optic Communication System
Need for Fiber-Optic Communications, Analog and Digital Signals, Optical Communication Systems,Optical Fibers as a Communication Channel, Optical Fibers, Wave Propagation, Optical Transmitters, Light-Emitting Diodes, Power–Current Characteristics, Laser Characteristics, Transmitter Design, Source–Fiber Coupling, Optical Receivers, Lightwave Systems, Sources of Power Penalty, Optical Amplifiers,Semiconductor Optical Amplifiers, Multichannel Systems, Soliton Systems, High-Speed Soliton Systems, Coherent Lightwave Systems, System of Units.
http://rapidshare.com/files/105694749/Fiber.Optic.Communication.Systems.rar.html