RSS Feed (xml)
Pull-up resistors are resistors used in the design of electronic logic circuits to ensure that inputs to logic systems settle at expected logic levels if external devices are disconnected. Pull-up resistors may also be used at the interface between two different types of logic devices, possibly operating at different power supply voltages.
The idea of a pullup resistor is that it weakly "pulls" the voltage of the wire it's connected to towards 5V (or whatever voltage represents a logic "high"). However, the resistor is intentionally weak (high-resistance) enough that, if something else strongly pulls the wire toward 0V, the wire will go to 0V.
The idea of a pullup resistor is that it weakly "pulls" the voltage of the wire it's connected to towards 5V (or whatever voltage represents a logic "high"). However, the resistor is intentionally weak (high-resistance) enough that, if something else strongly pulls the wire toward 0V, the wire will go to 0V.
No comments:
Post a Comment
Please give valuable comments on this post.